E-liquid too cold? Here's how to reduce the temperature. Ice -Effect when vaping
Introduction: When the cooling effect becomes too dominant
They love the
If the cooling effect is too dominant, you need to adjust the Liquid Don't throw it away. There are proven methods to remedy the situation. This guide shows you how to adjust fruit e-liquids that are too cold through targeted mixing or simple hardware adjustments so that the
Learn more about it here, why cold
Transparency note: This guide was created independently. The product examples mentioned serve to illustrate practical application scenarios; there is no advertising partnership with the mentioned brands.
Understanding the cooling effect: What's behind "Ice “?
In most modern e-liquids, the following are used for the “
The most well-known representatives are WS-23 and WS-3. Unlike natural menthol, which has a distinct characteristic
An important technical aspect: These synthetic refrigerants are considered to be low-volatility. While menthol has a relatively high vapor pressure and can easily lose intensity over time, WS-23 and WS-3 have significantly higher boiling points (WS-23 approx. 150–155 °C). Practical consequence: Leaving the bottle open does not significantly reduce the chill; at best, it allows the volatile fruit aromas to escape, which can worsen the imbalance. Active dilution is therefore essential.
Method 1: Dilution – Mixing for the perfect cooling level
The most effective method to reduce the concentration of coolants (which in commercial liquids is often between 0.5% and 2%) is to blend them with a counterpart.
Choosing the right partner
Avoid simply diluting the e-liquid with pure PG/VG base. While this reduces the cooling effect, it also dilutes the flavor concentration and – if present – the nicotine strength proportionally, often resulting in a "flat" vaping experience.
- The gold standard: Mix the “
Ice “-Liquid with an uncooled variant of the sameFlavour s. - Compatible profiles: A blackberry e-liquid that's too cold, like that one
ELFBAR 800 BlackberryIce For example, it harmonizes perfectly with a pure fruit liquid such as theELFBAR 800 Blueberry (nicotine-free). This results in a unique berry mix with significantly reduced freshness.
Step-by-step instructions for mixing
In refillable systems like the
- Small quantity test: Start by mixing just 2 ml in the pod or in a separate bottle to find the ideal ratio.
- 1:1 base ratio: Start with equal parts (50/50). This will immediately halve the coolant concentration.
- Homogenization: Shake the mixture vigorously for at least 30 seconds. Since coolant and flavorings can have different densities, thorough mixing is important for a consistent result.
- Ripening time: Let the mixture rest for 5-10 minutes to allow the liquid components to stabilize.
- Fine-tuning: Is it still too cold? Gradually increase the proportion of "warm" liquid (e.g., a ratio of 3:1).
Method 2: Adapting the hardware – Heuristic rules
The perception of coldness correlates directly with the amount of e-liquid vaporized per puff. Hardware adjustments allow you to influence the intensity without altering the e-liquid's chemistry.
Resistance and power (ohms) & Watt)
Based on general steam engineering principles: The more energy is supplied, the more massive the "
- Higher resistance (heuristic): Switch from a 0.6 Ω coil to a 0.8 Ω or 1.2 Ω coil. Higher-resistance coils are generally operated at lower power.
- Performance reduction: Use the lower end of the manufacturer's recommendation. If a coil is specified for 13–18 watts, 13 watts will noticeably reduce the cooling effect, as less aerosol is produced per millisecond.

Airflow management
A wide-open airflow (air supply) does physically cool the vapor, but often leads to deeper, more voluminous vapors.
Safety instructions and risk groups
When adjusting and mixing e-liquids, you should observe the following safety points:
- Nicotine concentration: When mixing, ensure that the target nicotine strength is maintained. Mixing a 20 mg/ml liquid with a nicotine-free Liquid halves the strength to 10 mg/ml.
- Hygiene: Use only clean empty bottles and avoid contamination.
- Intolerances: Synthetic coolants like WS-23 can trigger coughing or mucous membrane irritation in sensitive individuals. If symptoms persist despite dilution, this liquid is unsuitable for you.
Important warning notice: Vaping (with or without cooling) is associated with health risks. The following groups of people should refrain from using it:
- Minors (distribution prohibited by law).
- Pregnant and breastfeeding women.
- People with cardiovascular diseases or chronic respiratory diseases (e.g. asthma, COPD).
- Non-smoking.
Conclusion
An overly dominant one
Disclaimer: This article provides general information and practical experience regarding e-cigarettes. It does not replace medical advice. The use of e-cigarettes is at your own risk. Always observe local laws and the safety instructions of the hardware manufacturers.